---

1	MITCalc - Bolted connection
	Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD systems The calculation is ...
	Size: 1.5 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)

---

2	MITCalc - Force shaft connection
	Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards. The calculation is intended for geometrical ...
	Size: 1.5 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)

---

3	MITCalc - Shaft connection
	Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Design of a connection with parallel side keys. - Design of a connection with Woodruff's keys. - Design of a connection ...
	Size: 1.5 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)

---

4	MITCalc - Beam Calculation
	Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LUThis module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft ...
	Size: 1.4 MB,  Price: USD $21.00, EUR 14 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	1026, 1028, 1029, Beam Calculation, Bending Angle, Deflection, Din 1025, Straight Beam

---

5	MITCalc
	MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, pins, buckling, shaft, springs, bolt connection, welding, shaft connection, tolerance analysis, ...
	Size: 19.6 MB,  Price: USD $105.00, EUR 69 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Calculation, Calculations, Mechanical Calculations

---

6	MITCalc - Buckling Calculation
	) This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connections, tolerances and many others
	Size: 1.3 MB,  Price: USD $14.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	1026, 1028, 1029, Beam, Buckling, Column, Din 1025, Moment, Safety, Slender Strut, Stress

---

7	MITCalc - Bevel Gear Calculation
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
	Size: 2.1 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Bevel Gear, Design, Din 3971, Din 3991, Gear, Gearing, Helical, Iso 6336, Strength Check, Tooth, Toothing

---

8	MITCalc - Spur Gear Calculation
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
	Size: 2.5 MB,  Price: USD $24.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Design, Din 3990, Gear, Gearing, Helical, Iso 1328, Iso 6336, Spur Gearing, Strength Check, Tooth, Toothing

---

9	MITCalc3D for Solid Edge
	MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances ...
	Size: 24.7 MB,  Price: USD $119.00, EUR 79 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Calculation, Calculations, Mechanical Calculations, Technical Calculations

---

10	MITCalc - Springs - 15 types
	This module is a part of MITCalc - Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 1.9 MB,  Price: USD $24.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Belleville, Compression Spring, Conical Springs, Cylindrical Spring, En 13906-1, Helical Spring, Leaf Springs, Spiral Springs, Spring, Springs, Torsion Bar Springs

---

11	MITCalc - Profiles Calculation
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
	Size: 1.3 MB,  Price: USD $12.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Area Characteristic, Graphics Editor, Mass Characteristic, Profile Characteristic, Profile Design, Profile Editor, Profile Extrusion, Profile Rotation

---

12	MITCalc - Internal Spur Gear Calculation
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
	Size: 2.6 MB,  Price: USD $24.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Design, Gear, Gearing, Helical, Internal Gear, Iso 1328, Iso 6336, Spur Gearing, Strength Check, Tooth, Toothing

---

13	MITCalc3D for SolidWorks
	MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances and many others.
	Size: 26.1 MB,  Price: USD $59.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Autocad, Belt, Cad, Calculation, Calculations, Cam, Chain, Engineer, Gear, Mechanical Calculations, Technical Calculations

---

14	MITCalc - Torsion Springs
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 3.1 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Cylindrical Spring, Din 2088, En 13906-2, Spiral Spring, Spring, Springs, Static Strength Check, Torsion Spring

---

15	MITCalc - Tension Springs
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 2.1 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Cylindrical Spring, Din 2089-2, Din 2097, En 13906-2, Helical Spring, Spring, Springs, Static Strength Check, Tension Spring

---

16	MITCalc - Timing Belts Calculation
	Used standards: Synchronous Belts ANSI/RMA IP-24, 1983; DIN 7721; DIN ISO 5296; ISO 5295; ISO 5294 This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft ...
	Size: 1.3 MB,  Price: USD $14.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Ansi Rma Ip-24, Belt, Design, Din 7721, Din Iso 5296, Iso 5295, Strength Check, Synchronous Belt, Timing Belt, Toothed Belt

---

17	MITCalc - Tolerances
	2, ISO 286, ISO 1829, ISO 2768, EN 20286, JIS B 0401This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 1.3 MB,  Price: USD $21.00, EUR 14 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Deviation, Fits, Tolerance, Tolerances

---

18	MITCalc - Shafts Calculation
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 1.5 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Bending Angle, Critical Speed, Deflection, Design, Din 743, Safety Coefficients, Shaft, Shafts, Strength Check, Stress Concentration

---

19	MITCalc3D for Autodesk Inventor
	MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt and chain gear, bearings, beam, buckling, shaft, springs, bolt connection, shaft connection, tolerance analysis, tolerances ...
	Size: 28.8 MB,  Price: USD $119.00, EUR 79 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Calculation, Calculations, Mechanical Calculations, Technical Calculations

---

20	MITCalc - Rolling Bearings Calculation I
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 2.1 MB,  Price: USD $24.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Basic Dynamic Load, Basic Life, Basic Static Load, Bearing, Bearings, Bearings Pair, Equivalent Dynamic Load, Equivalent Static Load, Permissible Radial Load, Roller Bearing, Static Safety Factor

---

21	MITCalc - Compression Springs
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 1.9 MB,  Price: USD $19.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Compression Spring, Cylindrical Spring, Din 2089-1, Din 2095, En 13906-1, Helical Spring, Spring, Springs, Static Strength Check

---

22	MITCalc - Rolling Bearings Calculation II
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 2.3 MB,  Price: USD $32.00, EUR 24 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Bearing, Bearings, Bearings Pair, Roller Bearing

---

23	MITCalc - Technical Formulas
	Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, ...
	Size: 1.4 MB,  Price: USD $12.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Expansion, Friction, Journal Friction, Linear Motion, Motion, Rectilinear Motion, Rolling Friction, Rotation, Rotation Motion, Solid, Thermal Expansion

---

24	MITCalc - Pinned couplings
	The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with securing pins, design of cross pin in rod and sleeve, design of radial pin for shaft-hub connection, design of longitudinal pin for shaft-hub ...
	Size: 1.4 MB,  Price: USD $14.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	Clevis Pin, Coupling, Joint, Pin, Pinned Couplings, Pins

---

25	MITCalc - Tolerance analysis
	This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
	Size: 2.9 MB,  Price: USD $29.00 ,  License: Shareware,  Author: MITCalc (mitcalc.com)
	6 Sigma, Analysis, Deviation, Fits, Iso 286, Root Sum Squares, Tolerance, Tolerances, Worst Case